Home | About Us | Equipment | Packing | Gasket | Others | Contact Us | 嶄猟井

KEVLAR FIBER BRAIDED PACKING
   

   Kevlar fiber braided packing is made of Du Pont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant,brided into square cross section. As the strength and module of Kevlar is as high as the steel-like strength. So this packing compared with other kinds of braided packing, they can resist more serve media and higher pressure. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into packing set.
   This packing is mainly used as substitite of asbestos in pump systems.
Its property is better than asbestors, and it covers all the services ranges which asbestos packing provided and more. Under very bad conditions where ordinary asbestos packing can not provided the satisfied effect. But this packing has long service. It is usually applied to pulp factory, sand slurry, tin mine and feed water pump of power plant etc.

Kevlar fiber braided packing

Main specification of Kevlar fiber braided packing:
Temperature 200~280<C
Pressure 2~10MPa
PH range 2~13
Density 1.4 g/cm3
Velocity 2~18m/s

Products Show
  Packing Series

Expanded Graphite
Packing

Expanded Graphite
Molded Packing

Carbonized Fiber
Packing

Carbon Fiber
Packing

Kevlar Fiber
Packing

Pure PTFE Fiber
Braided Packing

PTFE Graphite
Fiber Packing

Ramie Fiber
Braided Packing
Asbestos Packing


PTFE Graphite
Packing Inter
Aramid


PTFE Graphite
Packing Aramid
corners

Acrylic Fiber
Packing

Novolid Fiber
With PTFE Packing

PTFE Filament
Packing

PTFE Lubricant
Packing

Cotton With Oil
Packing

E-glass Fiber
Packing
  Gasket Series
Other Series
 
   
 
    Copyright 2005-2008 Cixi Zonde Sealing & Gasket Co.,Ltd.
          Tel:+86-574-63787080,63787840       Fax:+86-574-63787241
          E-mail: sales@chinaseal.cn         mgr@chinaseal.cn