 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EXPANDED GRAPHITE CUT GASKET
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Expanded
graphite cut gasket are punched or cut from pure expanded graphite
sheet and reinforced expanded graphite sheet. Depand on its excellent
corrosion resistance, high and low temperature resistance, good
compression resilient and high intensity. All kinds of circular,
complicated geometric gasket are widely used in pipe, valve, pump,
pressure vessel, thermal exchanger, condenser, engine, air compressor,
exhaust tube, refrigerating machine, etc. 
| Reinforced inserted material | Stability under compressive stress (N/mm2) |
Temperature(°C) | Compressibility (%) |
Recovery (%) |
|
| In oxidizing media | In non oxidizing media | ||||
| Tanged carbon steel sheet | >=4.8 | -10~450 | -10~550 | 30~35 | 15~20 |
| SS304,SS316 Tanged | >=4.8 | -240~450 | -200~600 | 30~40 | 15~30 |
| SS304,SS316 Flat sheet | >=4.5 | -240~450 | -200~600 | 40~50 | 10~15 |
| SS304 Mesh | >=4.0 | -240~450 | -200~600 | 30~35 | 15~20 |
| Reinforced inserted material | Gas permeability (cm3/min) (Thickness 1.5mm\) |
Sealability (Thickness 1.5mm) |
Sealing constants | ||
| N2 m1/hr | Bumming oil A m1/hr |
"M" factor |
"Y" stress psi |
||
| Tanged carbon steel sheet | <=0.8 | 30 | <0.5 | 3.0 | 9000 |
| SS304,SS316 Tanged | <=0.8 | 60 | <0.5 | 2.5 | 4000 |
| SS304,SS316 Flat sheet | <=0.4 | 35 | <0.5 | 2.0 | 900 |
| SS304 Mesh | <=1.0 | 70 | <0.5 | 3.0 | 5000 |
